I couldnt find the Cura Settings for my Ender3 S1 online, so i transcribed them from the Creality Slicer and put them here.
For the printer profile i use the settings from mpox: https://mpox.gumroad.com/l/ender3s1
Printer Settings:
X (Width): 220.0 mm
Y (Depth): 220.0 mm
Z (Height): 270.0 mm
Build plate shape: Rectengular
Origin at Center: [ ]
Heated Bed: [x]
Heated Build Volume: [ ]
G-Code Flavor: Marlin
Printhead Settings:
X min: -26 mm
Y min: -32 mm
X max: 32 mm
Y max: 34 mm
Gantry Height: 25.0 mm
Number of Extruders: 1
Apply Extruder Offset to GCode: [x]
Start G-Code
G28 ;Home
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
End G-Code
G91 ;Relative positionning
G1 E-2 F2700 ;Retract a bit
G1 E-2 Z0.2 F2400 ;Retract and raise Z
G1 X5 Y5 F3000 ;Wipe out
G1 Z10 ;Raise Z more
G90 ;Absolute positionning
G1 X0 Y0 ;Present print
M106 S0 ;Turn-off fan
M104 S0 ;Turn-off hotend
M140 S0 ;Turn-off bed
M84 X Y E ;Disable all steppers but Z
Extruder 1
Compatible material diameter: 1.75 mm
Nozzle offset X: 0.0 mm
Nozzle offset Y: 0.0 mm
Cooling Fan Number: 0